Emanualonline Review is going to tell you the procedure in which you get to know how to service or maintain your vehicle by yourself without going to any service center. We will give you the various types of method which are discussed below. Read them carefully and apply on it.
Method 1 : Taking Care of Brakes, Belts, and Hoses
Replace your brake pads every 20,000 miles.
Failing of brakes may be extremely dangerous. If you consider your brakes may be failing, must them serviced immediately. To do it yourself, loosen the car’s lug nuts and then jack the vehicle up and replace your brake carefully.
Change out worn or damaged belts.
Check your belts for signs of cracking or advanced wear like rub marks. Then, check the belt’s tension to ensure it hasn’t stretched out
Replace cracked or damaged hoses.
With the hood open, look over the rubber hoses in the engine bay for any signs of damage. If you spot a damaged hose, place a drain pan beneath it and loosen the hose clamps with pliers or a screwdriver. Remove the hose and take it to your local auto parts store to get a replacement one of the correct length and interior diameter.
Method 2: Maintaining the Electrical System
Clean your battery contacts once a year.
The connection for your battery can sometimes get corroded or covered in grime, making it harder for the electrical current to flow through the car’s system. Use the correct sized wrench or socket and ratchet to loosen the bolt holding the negative (-) cable on the battery, then slide the cable off.
Use the brush and mixture to clean all corrosion and grime off of the battery posts and the metal connections on the cables.
Test your lights and replace any bulbs that have blown out.
Ask a friend to stand in front of your car while you turn on your headlight low beams and then high beams. Then test the left and right turn signals.
Replace your spark plugs every 30,000 miles.
Open the hood and locate the spark plug wires running into the top of the engine. Grip the closest wire to you low at its base and pull it up to unplug it from the spark plug. Use a spark plug socket and a ratchet to unscrew the spark plug and pull it up and out of the engine.